Maximum Legal Weight Allowed Tandem Axle (Two Axle) – 34,000 lbs. How much weight can a 2 axle truck carry? Some trailers won’t list a GVWR but instead an Unloaded Vehicle Weight (UVW) and Cargo Carrying Capacity (CCC). You want to make sure your hitch has a max trailer weight higher than your trailer GVWR. Yes, the Equal-i-zer hitch is designed to allow you to back up and take tight turns with the hitch hooked up. Can you back up with a weight distribution hitch?

Most mid-size and half-ton trucks require it at 5,000 pounds, while heavy-duty trucks usage can vary from 6,000 to 8,500 pounds. It’s a Required Piece of Equipment Every truck manufacturer, whether it is for a midsize, 1/2-ton, or heavy-duty, requires a weight-distributing hitch when using a bumper trailer hitch ball. If using a weight distribution system that does not come with sway control at all then backing up would not be an issue unless making severe turns (jackknifing the trailer) and you would want to remove the spring bars ahead of time.ĭo I really need a weight distribution hitch? Should I remove weight distribution bars before backing up? In addition to Bridge Formula weight limits, Federal law states that single axles are limited to 20,000 pounds, and axles spaced more than 40 inches and not more than 96 inches apart (tandem axles) are limited to 34,000 pounds. Well, our technical answer is no, a weight distribution hitch will not actually increase the towing capacity of your vehicle and ensuring that you stay within your manufacturer’s towing capacity is incredibly important for your safety and other drivers on the road. Proper weight distribution helps you from exceeding tow ratings, which increases the longevity of the tow vehicle.” Can I tow more weight with a weight distribution hitch? It gives you a better ride and driving visibility, it improves steering ability, it allows you to brake better, and it reduces driving fatigue allowing the driver to be more focused.

Husky Round Bar Weight Distribution Hitch with Bolt-Together Ball Mount/Shank Assembly.Equal-i-zer 4-point Sway Control Hitch.EAZ LIFT 1,000 lbs Elite Bent Bar Weight Distributing Hitch.Editor’s Pick: Andersen Hitches No Sway Weight Distribution Hitch.Once fitted and adjusted they create a lever that spreads the weight but not the mass being applied to the towbar and rear of the vehicle evenly across the axles of your tow vehicle and trailer. These are a set of spring bars that are fitted to the trailer’s drawbar.

Axle weight distribution calculator